DIY E-Liquid Mixing Guide 
How to make your own E-Liquid 

Welcome to Our basic guide to mixing your own Eliquid. This can be daunting at first but, with a little practice, it can yield great results. The ability to fine tune your Eliquid to personal taste and mixing larger amounts than the current TPD regulations allow is drawing more and more vapers to the art of DIY mixing. Hopefully this guide will ease those vapers not currently DIY savvy painlessly into the wonderful world of Mixology. 

 

Where to start? 

In this example, we are going to show you how to make 100ml of a 40%PG/60%VG at a final strength of 18mg, using 24% flavouring 

All flavourings vary in strength, even from the same manufacturer, some users will like a strong taste, some milder, we use this as an example only, vary as required and explained below. 

In principal, an e-liquid is made up of 4 things… So, you will need these (if you are making 0% Nic, otherwise known as “Nic Free” you won’t need the nicotine base), like any recipe, these main ingredients can be adjusted to suit your tastes and requirements. 

Nicotine Base (suspended in PG or VG) 

Propylene Glycol (PG) 

Vegetable Glycerine (VG) 

Flavourings 

However, there will be other items required to make up your e-liquid. Here is a list of suggested & required items, make sure you have all these before starting. 

Mixing Calculator, we recommend “EJuiceMeUp” it is a free download and very accurate Probably the most extensively used by e-liquid makers. Link Here:- http://ejuice.breaktru.com/ 

Syringes (1ml, 2ml, 5ml, etc) with blunt 18 gauge needles. 

Clean, empty bottles, of the required size. 

A clean & Safe working environment (away from distractions, children, pets, etc) 

Spillage clean up kit (some kitchen paper towels, bowl of fresh water, etc) 

Protective clothing and safety items, we suggest an apron, nitrile gloves, and some eye protection as a minimum. 

 What does each component do? 

Nicotine Base: We advise the use of 72mg/ml Nicotine (7.2%) in VG as the Nic Base ingredient (we will explain why we advise it in VG later), preferably of Pharma grade and from a reliable source. 

Nicotine is an addictive substance, as well as giving you the “Throat Hit” associated with a cigarette, it also satisfies your “Nicotine Hit” craving. 

Nicotine base requires respect. It can be extremely toxic and is absorbed through the skin, it can be absorbed even more easily when diluted with water etc, so great care should be taken when using it. Wear Gloves. 

Propylene Glycol (PG): can be used to dilute the concentrated nicotine liquid to the desired strength. PG carries the flavour, has anti-bacterial properties, extends the shelf life of e-liquids and helps give the cigarette-like “Throat Hit” that a good e-cigarette vapor gives the user. 

Vegetable Glycerin (VG): is also used to dilute the concentrated nicotine liquid to the desired strength. VG is smoother and gives less of a throat hit, but creates more vapor. It is often too thick to be used by itself, however, most suppliers will offer a pre diluted VG, sometimes called AVG, this is simply VG diluted at about 10% with a pure Lab Water to make the consistency more easily used with vape equipment. 

Flavourings: There are so many brands available, some good, some not so good.  

Flavours can be mixed together, for example Apple, Grape & Strawberry, or you can stick with just one flavour, the choice is yours. We will start to talk about Flavour percentages later, some flavours may be overpowering some may be milder and will be best when mixed with other flavours. . 

Mixing or combining flavours is where things start to get interesting. Combining the right amount of just two or three flavours doesn’t sound too difficult, but figuring out just how much of each can be a challenge and every persons taste is different.  

First Mix 

The calculator will help you to determine just how much of each ingredient is needed to deliver the expected result at the right nicotine level. Remember In this example, we are going to show you how to make 100ml of a 40%PG/60%VG at a final strength of 18mg, using 24% flavouring. 

Let’s start by loading the calculator and entering the required information.

spider venom mix

 

  

Enter the following information into the calculator, 

  1. On the first line “Nicotine Strength e-juice” Line of the calculator (on the left-hand side), enter the Nicotine as 100% VG and 72mg strength. 
  1. In the next line “Target Nicotine Strength”, enter 18, as that is our target strength for the final e-liquid. 
  1. In the next line “Amount to make”, enter 100, as that is the number of mls we want to make. 
  1. Leave the next line “Water/Vodka/VGA as 0, (we are not going to dilute it any more). 
  1. In the First “Flavouring” line, type in “Spider venom concentrate” as our flavour of choice, and 24% as shown. (Leave the PG/VG % boxes on this line alone for now – our flavouring is 100% PG and is already set). 
  1. Skip to the bottom of this section and type in to the Target PG “40” this should auto adjust the Target VG to “60” also. 

We are using syringes for measuring, so we don’t need to put in the number of drops per mil, so leave the box (at the top of the right hand side to 20 for now). 

Hit the Calculate button and you should see the recipe appear as above. 

This shows, to make 10ml of e-liquid you will need to use 

Nice and easy example, this will give you the same mix as you would have bought back before May 19th 2017. 

Changing the Values of your Mix 

You can play around with the percentages in the calculator, add or take away the amount of flavourings, PG, VG, etc…. hit the calculate button again and the resulting values change to tell you what is required. 

Using a “VG Nic Base” as opposed to “PG Nic Base” gives you more flexibility to vary the PG/VG percentages. Some users do not like high PG liquids and some report intolerance to high PG liquids, Using VG Nic Base gives you better control. 

Record the Mix 

Now is a great time to write down exactly what you have made, label the bottle with the name and the date, nothing is worse than discovering that you really like the flavour you made a week or two ago but cannot remember what you put in it. 

Always use syringes to measure out the ingredients as exactly as possible. A tip:- put some clear tape or clear nail varnish over the markings of the syringe before first use, as they do dissolve with Nic / PG over time . 

Vigorously shake the bottle and steep.  

After steeping it for a while then you are ready to enjoy vaping your new e-liquid. 

Some flavours will take a little time to fully mix and develop, so don’t expect it right straight away.  Try going back to it after a week or so, to see if it is any more enjoyable. 

More Information 

This guide is only intended as a “First Time Users” quick guide / explanation. "Google" really is your friend, there is a wealth of information to be had, from recipes to more advanced guides – it is well worth the time to look for them. 

We recommend this one, it’s the guide that we used way back when we were starting out:- GRIZWALD's GUIDE TO ALL THINGS MIXING 

Be responsible, Be safe, Enjoy! If you have any further questions, please feel free to ask!!

The Vapemunki Team 

  

  

Disclaimer 
This guide is intended to give information and advice to first time users, Vapemunki will not be held responsible for user misuse, misunderstanding, inaccuracies, including any resulting damage to persons or objects, accidental or otherwise, resulting from the use / misuse of this guide. 
The user operates on the premise of “at ones own risk” they should ensure they are fully familiar with the terms, equipment and products before making e-liquid. The user should undertake additional research to ensure they fully understand the methods, risks and hazards associated with the making of e-liquids.
Save

Sign Up for our Newsletter